Posts tagged “driver”.

Success: docking the eMate with the PowerMac G3

October 18th, 2010

Now that the iMac G3’s hard drive was installed into the PowerMac G3, it was time to see if my Newtons would get along with the new setup. My hope was that, since the OS 9 drive and OS 8 drive seemed to share a common Desktop, maybe the OS 9 drive would share some of its Entrega serial-to-USB adapter driver love. But no such luck:

USB not recognized!

As before, the PowerMac wouldn’t recognize it or the Keyspan adapter I plugged in. The Keyspan adapter drive I downloaded (USA-28XG) didn’t even recognize the adapter I plugged in. But then I remembered: back when Keyspan was gobbled up, I saved a backup copy of the USA-28X adapter installer. Maybe the one I saved would work.

After transferring the file over to the PowerMac, the installation process went smoothly. In the Control Panels, there sat both Keyspan 28-X controls:

Keyspan control panels

The 28-XG hadn’t worked. Would the 28-X?

Keyspan found

Sure enough it did. It recognized the Keyspan adapter and allowed me to mess with the advanced settings:

Keypan prefs

I had no idea what half of this stuff meant. The real question was, would it work with the eMate? And it did. Finally – although not before I had to remember to set up Newton Connection Utility to recognize the port:

NCU prefs

Now we’re getting somewhere.

Before, in the run-up to the System 7 experiment, the lack of a Newton driver was all that was keeping me from going through with the plunge into obsolescence.

With the ability to sync the Newton, I can work more on the whole Claris Organizer project, and keep backup files of all the eMate’s packages on the PowerMac’s HD. If I need it, I can use the iMac’s HD as a backup system. It’s beautiful.

This whole deal taught me two lessons: how easily I forget, and how important it is to keep backups of files. Especially ones you can’t get on the Internet any more.

The main reason I couldn’t go through with my Seven Day of System 7 experiment was because I couldn’t get the eMate (or the MP110) to connect with the PowerMac. Shuffling between the iMac and the PowerMac seemed like a hassle in an already full-of-hassle experiment. Now I only lose the bulk of the iMac, not the brains.

Really, I was waiting to find that stupid Entrega driver CD. Since it never surfaced (notice I’m blaming the disc), the experiment never happened.

But now? Man, it’s on. I have everything I need: my iMac’s games, files, and configurations; the ability to connect and sync my Newtons; a faster, more expandable machine in the PowerMac.

My plans still include buying a flat-screen monitor to save space – probably some refurbished Dell el-cheapo LCD. In the meantime, the Studio Display will be an workable stand in.

You know what I really like? The hum of the PowerMac. More delicate and softer than the PowerMac G4’s fans, the Blue and White provides a nice, steady white noise that I find relaxing. It’s something you never hear on modern Macs; the noisiest thing on my desk now is a pair of external hard drives. You can hear and feel those things kick on, especially during Time Machine backups.

A room full of PowerMacs might be a bit much, but the one I’m keeping produces a soothing whir that’s not obnoxious or distracting.

So by transplanting my iMac’s brain and finding a Keyspan adapter driver, I’ve turned the PowerMac G3 into an all-I-need Macintosh – the best of all worlds in one complete package.

Getting your Newton eMate wireless

May 11th, 2009

ematewireless

Mark Hoekstra describes how to get a Newton eMate 300 connected to a wireless network over at Geek Technique.

Why? “Well, impress your friends!” he says.

Hoekstra uses a WaveLAN Orinoco Silver network card, Newton Connection Utilities, a custom-made serial cable, a few package files, and a driver to get his eMate running on a wifi network. He takes plenty of pictures and goes into detail through the whole process.

Almost as cool? Using his Mac SE as a media center monitor. Hoekstra loses points for throwing Windows on that beautiful machine, however.

One of these days I’ll attempt the wireless eMate project. But for now, Hoekstra’s breakdown should give you a good head-start.

Keyspan adapters page found

January 29th, 2009

[Update 3.8.09: Reader Ivan found an archived page with the correct links. Also check in the comments section for more links.] Keyspan logo

Thanks to a reader, the almost-original Keyspan drivers page has been found.

Torner left a comment on my post about Tripp-Lite purchasing Keyspan. Keyspan makes (err, made) serial-to-USB adapters that us Newton fans use the heck out of, but after they were purchased their drivers download page disappeared.

The new Keyspan drivers page looks just like the old one, but with a new URL, and is much easier to use than Tripp-Lite’s version.

Good sleuthing, torner!

Keyspan bought by Tripp-Lite, drivers relocated

January 26th, 2009

tripplite

[Update: Ivan, in the comments, found the original Keyspan driver page.]

Last week, Leon pointed out that the pages containing Keyspan serial-to-USB adapters were nowhere to be found.

It’s true. Above is the page I landed on when I tried my own hyperlink. The page where Keyspan kept its USA-28x adapter driver was gone.

It turns out that a company called Tripp-Lite purchased Keyspan in May 2008 and dumped all the drivers somewhere else.

Keyspan USB adapters are considered the best in connecting your Newton MessagePad or eMate to Mac OS X. After a quick driver install, you can plug your Newton’s serial cable in one end of the Keyspan adapter, then plug in the adapter into your OS X Mac, and boom – full connection. If Newton users can’t find the Keyspan drivers, they can’t use the adapter.

And the new company, Tripp-Lite, doesn’t make it easy to locate the drivers. There’s a driver search page, and the USA-28x page, but it all takes some sleuthing.

This means that, after several blog posts on how to connect a Newton with an OS X Mac, I’ll have to update the Keyspan driver link. That’s not a big deal.

The big deal is Newton users struggling to find what they’re looking for.

[A big thanks to the Newtontalk gang for helping me locate the new driver pages.]