Newton Poetry

Since I made the decision to retire some of my classic Macs, I had some thinking to do: what parts, if any, would I keep? And would I miss any functionality?

I thought about all the hard drives, with their drivers and software, that were going bye-bye, when it hit me that I could install a hard drive or two into the PowerMac G3 I was saving. And since the iMac G3 was the only Mac that would work with my serial-to-USB adapters, maybe a brain transplant was in order. So that’s what I did – took out the iMac’s hard drive and installed it into the Blue and White, just to see if it would work.

This meant opening the iMac and getting to the hard drive. I’ve covered how to get into an iMac G3, but getting to the hard drive was a bit trickier since it sits snugly below the motherboard tray in some infernal metal sleeve.

There were screws to unscrew – quite a few of them. The CD-ROM drive also sat on top of the hard drive:

To top it all off, there are power and connection cables snaking around both drives, squeezed into that metal tray pretty tightly. So I had to figure which cable went to which drive and yank them out:

After I unplugged the cables and got the CD-ROM drive out of the way, I had to remove a few more screws in the side of the drive and get rid of the little metal prong that held the drive in place. A little bit of wiggling and the hard drive was out.

From there I placed the iMac’s hard drive in the second bay of the PowerMac (above), set the screws in the side to hold it in place, and plugged in the connection and power cables. After the installation was complete, I got the question mark Mac folder on startup, meaning either one drive or both were conflicting. The iMac’s drive was set to be a master drive, which is a no-no in the ATA world. So I set the original PowerMac drive to master and the installed iMac drive to slave, and the issue went away.

When the PowerMac did start up, it booted into its usual OS 8.6 drive, and what do you know – there was the iMac’s hard drive on the desktop.

Something weird that I never expected: the PowerMac and iMac desktops were combined. Looking at the desktop above, the Entrega file, Doom.jpg, and Grackle file were both on the PowerMac’s desktop, not the iMac’s. But each time I reset the system with a different startup disk, both environments seemed to share the desktop files. Pretty neat.

One weird issue that hasn’t gone away, however, is my iMac’s tendency to not shut down or restart. Heading to Special > Shut Down or Restart made the iMac’s screen flash, the icons blink out for a second, but then no restart or shut down would happen. To turn the thing off, I had to put it asleep and then unplug it.

Maybe installing the hard drive in the PowerMac would help, I thought. But no dice. After setting the iMac HD as the startup drive, the restart/shutdown problem was still there.

One suggestion had me dumping the OS preferences and emptying the trash. Trashing the Mac OS and Finder prefs didn’t help. Others suggested a complete reinstall of OS 9, which is a method that sounds more like a Windows thing than a Mac thing.

I tried a series of boot-up key combinations to no avail. The only thing that worked reliably was setting the iMac HD as the startup drive, and boot with extensions turned off (holding Shift on bootup). That let me turn off and reset the iMac HD.

The other weird issue: I set up Multiple Users on the iMac, thanks to OS 9’s then-new feature, but a while back the iMac started booting into the Owner account automatically – there was no login required and no Multiple User welcome screen. Heading to the Multiple User extension manager, I found the strangest thing: there wasn’t one. Well, the extension was there, but it wasn’t working. It showed up in the Applications menu as an option, but offered no interface for managing the actual extension.

It’s hard these days to find reliable troubleshooting information for OS 8 and 9, and a lot of my searches have come up empty. But really, I have the iMac’s hard drive in the PowerMac – saving both space and time. And I can still accomplish most of what I need without the physical iMac being present. So mission accomplished.

Next up: connecting my Newtons to this new setup.

It’s about time: Charles Mangin has plans to modify a Newton MessagePad into an iPhone case. But before that, he’s modded a MessagePad to look like a slick modern-Apple machine called the iNewt.

Very shiny, very geeky. Very nice, Charles.

[Via Slash Gear.]

Check that out.

Matthias Melcher has done something I’ve only been able to dream about: put the Newton OS Einstein emulator on an iPhone.

As he says, it’s only proof of concept right now. You can see it lags just a tad. But imagine this thing running full-power and full-speed on an iPhone, iPad, or iPod Touch.

UPDATE: Steven Frank went ahead and threw Einstein on the iPad. Fan-friggin’-tastic.

[Much abliged to Matthias for keeping me updated in the comments.]

Tony Kan from My Apple Newton:

The initial quake carried on for nearly a minute.

But it’s the aftershocks that have caused more stress. Occasionally one bumps through and the “here we go again…” thought comes to mind…

Schools are closed until Wednesday. All water needs to be boiled. Power, communications and water are restored to 90% of the city. Airports open. Railways closed. Reports of pools of quicksand appearing in one part of the city immediately after the earthquake. One woman fell into it and was up to her ears in it before her husband heard her cries for help and dragged her out.

Tony describes the scene from Christchurch, New Zealand’s recent earthquake. But if you know Tony, you know he’s got his Newton MessagePad ready.

Tony’s My Apple Newton is the premier Newton blog out there. Unlike Newton Poetry, which strays into Mac geekdom and random bits of culture, My Apple Newton is all business when it comes to the MessagePad. And here lately, Tony is on a much more prolific posting schedule than I can ever be. If you want to know more about how to use your MessagePad or eMate, and what makes it tick, Tony’s blog is the place to go. He’s the Newton user’s Newton user.

And in the middle of this natural disaster, Tony’s still rocking the Newton in posts like “Surviving the Christchurch Earthquake“:

Guess what was an indispensable tool in the aftermath? My Apple Newton. During the odd quiet moment I could relax by journalling what had happened and then email the updates to friends and family when power and communications were restored.

Even his updates are posted with his Newton, thanks to (I imagine) nBlog.

Pretty remarkable that something as “obsolete” as the Newton can come in handy during a crisis. It’s a tough little beast, and when the right kind of person wields it, the Newton remains a go-to tool.

All the best to Tony and everyone in Christchurch.

[Via Riccardo Mori at System Folder.]

Mike Grimm, darn near a neighbor to me over in Fowlerville, Mich., shared a collection of his own Apple portables – including an Newton eMate 300, several varieties of iBooks, and a PowerBook 190 (“Ready for PowerPac Upgrade“).

“Eventually there may be some of the vintage desktops, and maybe a couple of PDA shots,” Mike said over e-mail.

I don’t see the neon eMate styluses very often, but Mike shares a bright orange one in his eMate shots.

The United Network of Newton Archives, or UNNA, is looking at clearing the cobwebs and hosting new Newton-related software after long last.

Morgan Aldridge, UNNA wrangler since 2007, gave the above hint on Twitter – a sneak peek at the Recent Additions page. It shows the latest 25 uploads to UNNA through a moderated database, says Morgan.

“Any new files uploaded and existing files that have new descriptions added get added to a moderation queue,” he said in an e-mail. “If it’s just a description, it’s just a matter of tweaking and approving the description. If it’s also a new upload, the moderation tools support publishing the file to the final destination as well.”

The previous UNNA moderator, Victor Rehorst, stopped taking new UNNA submissions in 2004, and then handed off UNNA’s hosting to Morgan. Finally, he says, he’s getting around to adding new stuff to the archive.

“In the past few years a number of Newton-related sites have disappeared for good and I and others have become increasingly worried about preserving all of this data,” Morgan said. “The least I could do is get UNNA opened back up. So, a couple months ago I started moving forward.”

Between some detective work, trying to figure out how Victor managed all the data, and some version control issues, Morgan plunked away at the project a few hours at a time. Now the Recent Additions page is his way of testing out the uploading and moderating tools. UNNA has preserved Newton sites along the way.

The idea is to keep the Newton software and sites in a downloadable vault to keep it from vanishing. As I’ve found, more and more Newton sites are disappearing. The same can be said for software: companies go out of business, people move (or die), computers crash.

Morgan says he doesn’t get a whole lot of submissions these days, but new entries trickle in every few months. Mostly, he says, Newton users have expressed “discomfort with the state of UNNA.” So he’s going to start fixing that. One of the first new entries: Brian Parker of Sealie Computing is submitting full versions of his NewtChat, NewtGlider, and MathFaster packages, and mirrors of the web pages.

“He’s still looking to see if he has the NewtGlider source code and such, but I’m already happy to have this work preserved,” Morgan said.

UNNA is an indispensable resource for any Newton user. I find packages in the archives that I try out just for fun, and Newton Poetry has only been possible through a lot of that old software. It’s great to hear we’ll be getting some new stuff up and available for download.

[Via UNNA on Twitter. Follow Morgan’s own Twitter stream, while you’re at it.]

From the New York Times’s original review of the Newton MessagePad:

The bottom line on the Newton Message Pad is that Apple promised too much and failed to deliver a useful device for everyday executive chores. On the other hand, the Message Pad practically hums with untapped potential, and six months (or moths) to a year from now it is likely to be a popular executive tool.

…When it was first described publicly more than a year ago by Apple’s chairman, John Sculley, the Newton was said to be a combination pen-based computer, personal organizer, fax and data communicator, and wireless messaging system.The Newton is indeed full of promise, but that’s not the same thing as fulfilling the promises.

I’m just trying to think of a situation where today’s Apple would release a product that had more “untapped potential” than actual usefulness.

The original iPhone, maybe? It didn’t have apps, cut/copy/paste, or any of the things we all take for granted now. But then we didn’t have to worry about faulty handwriting recognition. Today, it seems a new Apple product must have an immediate pick-up-and-use aura. Potential comes through iteration, sure, but you’re not left holding a device that inspires a yawn – or a question of its practical aspects.

The opposite argument is that apps didn’t come to the iPhone until a year after its launch, and then the whole world seemed to open up. With the Newton, it took until at least Newton OS 2.0 to get things in motion.

The kicker of Peter Lewis’s review comes at the end: “The possibilities are grand. For example, one can imagine cellular phone circuitry being shrunk to fit in the Message Pad’s credit-card-sized PCMCIA slot, or a Newton being shrunk to fit in a cellular phone.”

One can imagine, indeed.

[Via Gizmodo, via Retro MacCast.]

“I don’t need a phone. What I need is a mobile communications device that can also manage my contact, calendar, and run some useful apps. That’s how I started down my path of indispensable electronic do-dads with the Apple MessagePad 130, aka the Newton 130.”

– Joe Levi at Pocketnow.com.

Mark Johnson shared a new collection of Newton photos, straight from his collection, from his site Newton Collection.

Johnson shares a bunch of photos of other Newton-powered PDAs, as well, such as the Sony Magic Link and Motorola Marco.

“I started collecting Newtons as they are easier to store than Macs,” he told me. “Space is a premium!”

Patrick Rhone at Minimal Mac:

That shiny new phone you want you don’t want bad enough yet. That system that is getting “a little slow” is not yet slow enough. Even if it is too slow for you it is more than most of the world could ever dream of having. Seriously, use your technology until it hurts – bad. Because the pain all of this consumption is bringing to a world that is just beyond yours is immeasurable.

Amen, brother. It’s something I’m fond of saying, and often repeat (and practice): just because it’s a few years old doesn’t mean it’s not worth using or tinkering with.

Rhone points to Free Geek, a larger, more organized version of my One Used Mac Per Child brainstorm a few years back.

But there’s a larger issue here than just taking old computers and fixing them up. The materials inside them, when shipped overseas, become hazardous beyond belief. We sit here in modern comfort, tossing out our old cell phones (I once saw a guy throw his phone out his truck window, smashing it on the street) or “recycling” our old Macs, never knowing where they end up.

I do my part, but I’m only one person. I do know many others that care about this stuff, and care about geeking out with old Newtons and Macs and keeping that stuff out of landfills and smelting pots. Kudos to Rhone at Minimal Mac for spreading the word.